RB iconIP iconMPE iconRBAS iconRouse icon

Matec MAGNUM FP2000X2000

Pris eks. MVA

FavoriteFavoritt
shareDel
Save searchLagre søk
Skriv ut

INFORMASJON

Gruppe
Anlegg - Annet
Merke / modell
Matec MAGNUM FP2000X2000
Årsmodell
2018
Kategori
Brukt
Lagersted
Langley, British Columbia
Land
Canada
Mascus ID
AF3131FC

PRIS

Velg valuta

DETALJER

Lager nr.
114324
Beskrivelse
2018 Matec MAGNUM FP2000X2000 Filter Press System – Fluid Handling Equipment Water Treatment Title: Filter Press System MAGNUM FP2000X2000 SKU: 114324 Model: MAGNUM FP2000X2000 Year: 2018 Condition: Used S/N: 18202001 - 18202002 [PDF INSTALLATION MANUAL](... MAGNUM FILTER PRESS DATA SHEET](... Process - The actual filtration process occurs in the filter pack, consisting of a customized set of plates. - The cloths and under-cloths cover the filtrating surface of the plate, which has small projecting cylinders forming drainage channels. - Once the filter pack is completely sealed, the filtration process begins from the head plate with the feed pump injecting the sludge into the filter plates chambers. - The cake will form uniformly all across the filtrating surface and is ready for discharging once the required moisture level has been reached. Magum Filter Presses - Qty: 2 - System Voltage: 575 V, 60 Hz - Length: 14210 mm - Width: 3430 mm - Foot Wheelbase Length: 12070 mm - Foot Wheelbase Width: 1356 mm - Total Height: 3795 mm - Weight: approx. 57500 kg each - Chamber Volume: 115 L - Capacity Per Cycle: 11500 L - Cu. m/h (2 cycles): 23.00 - Ton/h (2 cycles): 42.55 - Cu. m/h (3 cycles): 34.50 - Ton/h (3 cycles): 63.83 Model: MAGNUM FP2000X2000/100 NEWTT HTP - 100 plates CH32,5 (plates CH30 (recessed) e CH35 (membrane)) - Closed loop discharge - New TT - Centralina - Shakers - Real Wash - Core blow - Drip tray - Framing of the structure - Pressure: 21 bar - Tension: 575V 60Hz - PLC: Allen Bradley Model: MAGNUM FP2000X2000/101 NEWTT HTP - 101 plates CH30 (Plates both CH35 e CH25) Membrane - Open discharge - New TT - Hydraulic unit - Shakers - Real Wash - Core blow - Manifold discharge with valves and tray - Framing of the structure - squeezing kit (pump + piping) - Pressure: 21 bar - Tension: 575V 60Hz - PLC: Allen Bradley NOTE: The ton/h and cu. m/h data above are calculated on a material specific weight of 1.85 and a 35 mm cake thickness Additional - 6 - Stainless steel tanks - 1 - Smaller stainless steel tank - 2 - Large receiver air tanks (2019) - 1 - Bilton insulated tank, large - 1 - Bilton insulated tank, small - Pumps & actuators - All electrical / transformers

Lenmark Industries Ltd

27576 51a Ave V4W 4A9 Langley British Columbia Canada
2
År på Mascus
report adRapporter mistenkelig annonse